ABLOY® Protec Authorized Dealer Vancouver

ABLOY Protec Authorized Dealer Vancouver

In keeping with our tradition of offering the highest level of security to commercial and residential locations, Mr. Locksmith™ is an authorized Canada dealer for ABLOY® Protec locking systems.

About Abloy:

Originating in 1907, Abloy is well known throughout the world for their dedication and success when it comes to creating some of the most secure locks that are both drill and pick-resistant. Even their older generation lines are still proving to be exceptionally resistant to attempts at defeating the security that they provide. This places Abloy in a unique class of high security locking devices.

Notable Features of Abloy Protec2 Lock:

One of the primary features of Abloy locks is their ability to be drill resistant. Most Abloy locks are constructed from hardened steel as well as offering thick anti-drill plates. Having their locks created completely from hardened steel sets Abloy locks apart from other manufacturers that utilize brass with hardened inserts for their construction. Many of Abloy’s locks also feature an anti-drill plate that is fully free-spinning. This will keep a drill from achieving penetration by being able to turn 360 degrees when coming in contact with a drill bit. The locks also feature other steel components and an anti-pull sidebar. For locks that are more prone to being attacked, a 1/4″ anti-drill plate is designed to protect the front of the cylinder. All of these features add up to the creation of locks that offer drill protection that you won’t find in other lock designs.

For environmental reliability, Abloy disk detainer locks feature a self cleaning design that allows dirt and other foreign matter to simply fall out of the lock upon key insertion or removal. With no exposed springs or areas for dirt build up, Abloy locks are designed to be used in exceptionally harsh environmental conditions without compromising their reliability. They also offer a padlock line that is IP68 certified (the highest IP rating). This Super Weather Proof (SWP) padlock line provides protection against liquids, salt, dirt, etc. even when used under extended pressure for extended periods of time.

Additional Abloy Protec2 features include a master key system capability with 1.97 billion possible combinations that provide both security and convenience. There is also a new anti-wear system that will decrease the possibility of key tip wear even when the keys are subject to over tens of thousands of uses.

Abloy Protec2®

The Abloy Protec2 is the next generation of the Abloy’s highly successful Abloy Protec line of high-security locks. These locks are similar in design to the original Abloy Protec locks but with some additional technical features for increased security. Within the keys, there exists a movable element whose feature is to foil attempts at creating counterfeit keys. There is also a patent in place that legally forbids the creation of 3rd party key blanks. The original Abloy Protec patent will be valid until 2019, while the Abloy Protec2 patent is valid until 2031. Even after the patents are no longer valid, Abloy maintains a tradition of key blank control that has historically extended to their other security product lines.

Abloy Protec2 cylinder on Abloy deadbolt.

New installation of Abloy Protec 2 cylinder Abloy deadbolt

 

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Read our recent reviews

[show-testimonials alias=’SHOW REVIEWS’]

Leave us a review!

[show-testimonials-form alias=’Review system’]

 

My Favorite Deadbolt for your home: Abloy Protec 2 | Mr. Locksmith Video
For further information go to www.mrlocksmith.com
Why do I have an Abloy Deadbolt protecting my house? I train Locksmiths, Military, Police and Government agencies convert and overt methods of entry. The one Deadbolt on the market that has “no known convert” methods of entry and what I consider not only “pick resistant” but “pick proof” is Abloy Protec 2 Deadbolts.
If the I get locked out I know that it will not be an easy job gaining access through my Abloy deadbolt. Most deadbolts and High Security deadbolts can be drilled open is seconds or minutes. I know that I or anybody will be spending alot of time, effort and money trying to destroy my Abloy deadbolt.
The face of the deadbolt has hardened steel and will chew up a dozen expensive drill bits I use to open safes.
Note: most safes are opened with one drill bit.
I have reinforced my door with a Mag Plate that doubles the strength of the door and I have reinforced the door frame with an 18″ strike with 4″ screws attaching it to the door frame making the door and frame more difficult to force or kick open.
Bottom Line: I want to protect my family, my home and my stuff and I sleep better and go to work or vacation knowing I have the best lock, Alboy deadbolt installed on my doors.
Mr. Locksmith™ is an ABLOY® Protec Authorized Dealer. For further information on Hands-on and On-Line Locksmith training and our famous “Dumb Key Force Tool” go to http://mrlocksmithtraining.com/
In keeping with our tradition of offering the highest level of security to commercial and residential locations, Mr. Locksmith™ is an authorized Canada dealer for ABLOY® Protec locking systems.
See more at http://www.mrlocksmithburnaby.com/abloy-protec2-authorized-dealer/#sthash.BCKlotBJ.dpuf
Call Mr. Locksmith™ 1-604-259-2953
Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners,
Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

My favorite deadbolt which is the Abloy Deadbolt as well as master keying. I like this deadbolt so much, it is installed on my house. I am paranoid, I admit it, I always have been, I always want the best I can have on my house and my business and my camper. So I have the Abloy Deadbolt, 100% deadbolt on my house, and I use all the padlocks on everything else I have. So that Mike from Mr. Locksmith Burnaby is probably our top locksmith on Abloy, he does amazing things with this. It’s absolutely fantastic,  I will let Mike discuss the Abloy Protec 2 Deadbolt.
The Abloy Protec 2 Deadbolt has a Pick Resistant UL 437 rating.
Furthermore,  there is no known Covert methods of entry on this lock. A lot of people are trying to figure out how to do this, there are no known methods, so when people say it can be hacked, or picked or anything if you’ve seen all my videos, I hack, and pick and get into everything. This has no known Covert entry methods, that’s why I love it so much.
The front of the deadbolt is hardened too. The Abloy Protect 2 deadbolt is a pick, bump and drill-resistant lock. Nothing is 100% drill-proof, but this is deadbolt is extremely difficult to hard one to drill. The Abloy deadbolt is fire rated to 20 minutes.
You are not going through this lock, and it’s basically, it’s a nightmare too, for, and if you look at our video on how to circumvent with drills and other methods of entry.
Basically, master keying is, you can have one key fit two or 2,000 doors, so the one key would fit everything, as well as you still have the individual keys that fit each office or each apartment, so that’s master keying, but there are some interesting options you can do with an Abloy.
Grandmaster, Master key, “A” keys, “B” keys, everything else, it doesn’t decrease the security of the lock. So traditionally, master keying one of these locks will not make it easier to open.
Abloy deadbolt that has created a locking thumb-turn. Leave it in unlock position, of course, when you go for vacation, for example. It’s ideal for doors that are close to like, a patio door, or something close to a window.
Key control: Nobody can cut this key, except for, we have, this is a Mr. Locksmith keyway, you can’t go anywhere and get this key cut. Even another Abloy dealer will not do it, they can’t do it, they don’t have the blank, and that’s one of the big problems is, with a lot of locks for businesses and everything else is key control. You have total, total key control on this, it’s patented ’til like, 2026 or something.
The Abloy Protect 2 locks have key control, pick-resistance, no one’s gonna get through this door unless they chop their way through it, and no one’s going to have a key to get in, you can’t get this cut anywhere, at all.
The key machine that cuts this key is, every key is cut individually, you’re not duplicating. You can’t take this key and say, “Hey, “I wanna duplicate it, put it side-by-side “on a duplicating machine,” you just cannot do that, and there is a floating, like, this is a Protec 2 keyway which means it has a ball-bearing within the key itself, and that is part of the locking system. Without that ball-bearing floating in there, it will not even turn the cylinder on the outside portion of it. So that in itself is a locking mechanism. So I had keys that accidentally had the ball-bearing pop out for some reason. I don’t know what they were doing to it, but it won’t even let them in anymore. The other thing is, yeah, these are very strong keys.
Abloy High Security Lock Key Control
Abloy keys that can’t be duplicated or unauthorized duplication. In the old days, you’d stamp a Kwikset key with do not copy but they could take the key to the local shoe repair guy and get a key cut. So, “do not copy” is absolutely meaningless on a regular key. It’s not worth nothing, and we tell people that. However, when you get a proper system like and Abloy, Schlage Primus or Medeco lock that have the patented key control, nobody can cut the keys unless you are the authorized person. It’s a special key Patented High-Security Key. The Abloy is key particularly good because it can not be cut by anything other than an Abloy key machine. So, if we’re cutting them, and even another authorized Abloy dealer will not cut this key for anybody at all because they just lose the whole ability to sell Abloy and a big fine from the manufacture written into the seller agreement.
The Abloy keys are high security. Each one is cut individually on a special Abloy machine. You can’t just get a machine and say, “Hey, you know, can you put this one here?” Which is a cut key and a key blank and just duplicate it like traditional ones. You can’t do that. This is Abloy Protec 2. It’s a latest technology. It does have a ball bearing inside, and that is integral in locking and unlocking your door. So if it ever pops out, which it shouldn’t, that alone will stop you from opening that door. Abloy Protec 2, when you purchase a lock, you will get a registration card that will match a two-part registration card, where you keep one part and I will keep one part, and when you reorder, you will have to present that card in order to get duplicate copies of that. So, anybody who phones my number and the key and says “I want a duplicate copy of this key” will not get a key. It could be your plumber, your electrician nanny, cook, whatever. It doesn’t really matter.
The bottom line is, this is a patented key control system, it requires a special key machine to cut it, you’re not going get this cut by the local hardware store or the shoemaker. No one is going to be able to cut this. The specs are so tight, we are not gonna see them in the foreseeable future.
On 3-D printer or other methods of key duplication. This total key control, when they dig up our civilization, I keep on hearing, “Oh, keys are old.” “They’re gonna go passe.” “We’re all gonna go electronic locks.” No. When it gets right down to it if you have to secure something you are going do it with a High-Security Lock and key. If you want to be totally secure, you are going to have something that has patented key control. This is a high security Abloy. It’s the Protec2. Nobody can cut the keys except for the authorized dealer only with the authorized cardholder. This is a patented system, and again, I have it on everything. I have it in the Locksmith and my house. Whether it’s a master key, regular key, or whatever. The Abloy is one of the best systems out there for key control and physical security for your home or office.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.